The replacement handle latch for the DeeZee Specialty Series Underbody Toolbox such as the Brite-Tread Aluminum model # DZ61 is their part # DZK2702ST that you referenced.
The part # DZK2702STC fits the steel tool box. view full answer...
I spoke to my contact at DeeZee and for Specialty Series Underbody Toolbox # DZDB-2602 you would need handle # DZK2702STC. This handle is for the steel boxes.
The other handle, # DZK2702ST, only works on the aluminum boxes. view full answer...
The RC Manufacturing Z-Series Underbody Toolbox part # UBT1818-30 which measures 30" long x 18" wide x 18" tall is deigned to be used on flatbed trucks, dump trucks, or trailers. That said, it can be made to work on other application as well but you'd need to make custom mounting brackets for this. view full answer...
Yes, I do carry a door hinge for your RC Manufacturing Underbody Toolbox, part # UB1818-48. This toolbox uses a stainless steel piano hinge as the door hinge. To get the correct size hinge, I would recommend to measure the width and length of the hinge you have now.
To find out the size you will need, fully open the door of the toolbox and measure the width of the hinge. If the toolbox has a width of 2 inches, you will use the Redline 2 Inch Wide Stainless Steel Hinge, part # SH200. If... view full answer...
The Replacement Striker Bracket for UWS Truck Tool Boxes - Qty 1 # UWS-SBRACKET will use the Replacement Nail Head Striker Pin for UWS Boxes with Paddle Handles - 1/4" Diameter # C003-NHPIN. view full answer...
We offer a replacement heavy-duty gas strut with a 10-inch dimension between its ball/socket mounts, part # UWSLIFTCYLIND from UWS which is the item you referenced. This item has a weight capacity of 45-lbs. I could not find a cross reference for the part numbers you provided (thank you) but since the dimensions match up exactly, so long as your tool box lid does not weigh more than 45-lbs (unlikely since it is aluminum) you should be fine using this item in your Husky tool box. view full answer...
Key codes for UWS toolboxes usually include the letter prefix CH. Please refer to the photo that shows where to find this on the face of the lock. This photo happens to show a lock code CH510.
I tried both of the codes you gave but neither seems to return a valid result.
You may prefer to just order a whole lock with new keys. We offer several options for different types of tool boxes. For example, part # UWSLOCKCH510 is a lock with two keys that fits toolboxes with square paddles, but... view full answer...
We do not carry your specific brand of tool box but we do offer a Replacement Lift Cylinder part # UWSLIFTCYLIND which may work for you since often tool box parts like lid-lift struts share common fits.
This strut measures 7-inches in length when fully retracted, and 11-inches long when fully extended. The strut fits on ball studs like # UWSBALLSTUD that are 9.75-mm in diameter and it has a 45-lb lift capacity. view full answer...
The UWS Replacement Toolbox Lift Cylinder # UWSLIFTCYLIND will fit all UWS brand tool boxes that use this type of heavy-duty gas lift. The length of this part, measured from the center of one ball socket to the other, is 10-inches just like your original part. The two ends of the cylinder have the same type of ball socket fitting, which is shown on the linked photo I prepared for you. view full answer...
Yes, as long as CH508 is stamped on your lock cylinder you will be able to use the Replacement Key for UWS Toolboxes - CH508 # KEYCH508. Since that is what you found on your existing key I would assume your lock cylinder is marked the same way. view full answer...
I checked with my technical contact at UWS to see if they made the truck cap tool box for Leer but I was not able to confirm that this was their OEM product. Still, it is quite likely that this part will work for you since the reference number matches exactly.
To help you confirm the fit I pulled a sample from inventory and took several measurements for you.
The video linked at right will show you this item and includes the measurements. Please note that part # UWSLOCKCH509 includes the... view full answer...
While there's a very good chance that the UWS Replacement Lock Cylinder - CH502 # UWSLOCKCH502 referenced in your question is what you need for your Delta Truck Box, the two manufacturers aren't related to each other. We do not currently carry Delta products so I can't confirm that the UWS lock and key set will work on your box, but since the numbers are exactly the same it's likely that the two companies simply obtain their latches from the same source. If this lock set looks like what... view full answer...
We have exactly what you need.
For a replacement 501CH key for your truck tool box, you will use part # KEYCH501. If you need both the key and lock cylinder, you can use part # UWSLOCKCH501, which comes with the lock core and 2 keys. view full answer...
To get replacement keys for your DeeZee toolbox you can do that with part # DZKEY. After you get to the page for the key you can type in the toolbox number of the key you need and change the quantity to the number of keys you want. It's that easy. view full answer...
For your 2005 Dodge Ram 3500 Long Bed with the Truxedo Lo Pro QT part # TX1117416 the tool box part # TX1117416 will fit and work well.
Since your bed is a long bed it will also fit with that too since you'd have plenty of room for the width of the box. view full answer...
I have a suggestion for you as without knowing the box manufacturer or the lock manufacturer it is impossible to guarantee the Key # KEYCH501 will fit your lock. If you can access the inside of the lock you may consider replacing it with the Replacement Lock Cylinder # UWSLOCKCH501. Of course you will need access to verify the cylinder you have can be removed and matches the style of this cylinder. Otherwise you will want to visit a lock smith who will be able to create a new key for you... view full answer...
You sure can replace the locks on your UWS toolbox and install locks so that you have the same locks on all 3 tool boxes.
Just order the replacement lock cylinders with part # UWSLOCKCH502. Each of these locks come with 2 keys. If you need additional keys for the 502 locks, just order part # KEYCH502.
These cylinders will not work with drawer slide, dog boxes, T-handles or push-button locks. view full answer...
We have several different locks available but they are not made specific to a particular camper. They will replace the tool box lock completely. You will choose the replacement based off of your depth of latch thickness. Or the distance from the mounting surface to the area the latch goes behind. They are designed to fit the common 3/4" hole found in most tool boxes and storage areas on RVs.
For instance the Camco Cam Lock part # CAM44340 is designed for a depth of latch thickness of 5/8"... view full answer...
A lot of brands of toolboxes use the same keys and locks. It is likely that replacement key # KEYCH504 will fit your DeeZee toolbox. UWS and DeeZee are different manufacturers though.
But to take the guess work out all you need is # DZKEY. Just type the key number where indicated on the page and you will get 2 replacement keys to match the lock number. view full answer...
I do have a possible option for you but we do not carry replacement keys for Dewalt tool boxes. Instead, I recommend replacing the locking core with something like part # UWSLOCKCH501. You may need to reuse your existing cam in order for this locking core to work. This lock is the standard 5/8" diameter x 1" long. view full answer...
Go To Results